Gardening with Conductive Helical Coils 2016

dscf7798

So despite the blog and my internet presence being quite mute as of late i actually have been up to quite a lot. My homemade Lulzbot Mini 3d Printer this summer was a success, amd i have constantly been improving it. At some point i will take some photos of it’s final progress. A few of my pea breeding crosses from last year were successful, including one i’m excited to grow again which is a cross of the Purple Passion dark purple seeded pea (which is a small genetically weak pea variety) with another stronger pea variety. That should produce something really cool in the coming years. And this fall and next spring i’m experimenting with school by going through a Precision Machinist course and am learning how to use milling machines, lathes, and CNC equipment to produce Aerospace quality components. Not sure if that’s something i want to do long term, but they are skills i’m interested in and can use throughout my life. So that’s new.

Anyway though, as a throwback or a revisit to my post in 2010 titled “Do Plants Really Need Sunlight?“, which has actually been one of the most visited posts on my blog over the years, i finally got around to building a few of those coils that sounded so interesting.

q
Conductive Helical Coil around the stem of a plant

So the basic premise or idea behind using a coil of wire with electricity is that it produces a small amount of electricity or a magnetic current through the air. This is the same idea Nicola Tesla was after all those years ago when his imagination was captured with the idea that everything could have wireless electricity. And in many cases his dream has come true with an ever increasing amount of technology these days using induction to wirelessly power or heat things. The basic premise of applying this technology to plants comes from an article i read once that talked about how researchers were able to measure a small direct current from trees in a forest by placing nails in them. They then had ideas about placing nails in many trees and hooking them up together to power small electronics like a battery or cell phone charger, or a smoke alarm. Basically all plants (and maybe all living things) produce a bioelectric field of energy. If one can tap this field to harvest electricity, then why cant we tap into it and feed these plants with extra electricity to help them grow.

One question i asked in my old blog post was if plants even need sunlight at all as long as they are getting some form of energy to grow. I still haven’t done an experiment to test that idea, but it’s still an interesting question. Because it makes me wonder if there are ways plants could be grown in complete darkness.

dscf7796

Regardless, this summer i finally built a prototype plant coil. I built it rather late in the season, so i really wasn’t able to give it a good test. My original plan was to plant 3 or 4 genetically identical tomato plants near each other in the relatively same soil with at least one plant being the control. I was then going to observe over the course of the summer f the tomato plants within the coils had larger and better growth than the control. That was plan anyway, i just didn’t quite get to it.

dscf7797

You can see here we were trying to use a volt meter and another coil to see if we could detect that our coils were working. We weren’t having much success with the meter in the beginning and i don’t remember if we did later after increasing the power supply a bit. But in theory you should be able to measure with a second coil.

dscf7800

I placed it on three smallest tomato plant clusters in the very late planted tomato patch. Interestingly enough, the three plants it happens to be on might be the only three blue tomato genetic varieties that survived my haphazard tomato disasters this year. Since placing the coils on these plants i have noticed an improvement in them and they have since catched up to the growth of the other tomato plants in that spot. Although at the same time i did also make a furrow and started watering them more. But even so i’d be willing to go out on a limb and say that the coils did help them go from “runt” status to catching up to the others. I may yet get a few tomatoes from the larger two before winter hits. Thanks to Gilbert for providing the motivation to actually build this project. And a thanks to the Homegrown Goodness plant breeding forum where i get so many of my adventurous gardening and plant breeding ideas. You guy’s are the best and a continual inspiration to me. Read more: http://alanbishop.proboards.com/thread/8623/breeding-tower-potato-ideas-wanted?page=13#ixzz4LoiDtFZE

dscf7907

dscf7909

dscf7910

dscf7911

So, while my experimentation was a bit haphazard this year i think i still did ok. It was a fun project that went from an interesting patent to a cool project idea in my head and at the back of my mind, to a fully functional project / prototype. Plus i think these coils look cool. haha.

But it makes me wonder what other cool patents are out there that i can exploit, reverse engineer and build to experiment with. One of my next projects i think will go the opposite route and will be heavily steeped in Open Source as i think i will try and build a “Food Computer“. Basically it’s a small climate controlled aeroponic grow box. It should allow me to continue my plant breeding efforts even in the winter which is really what i want. Plus it will allow me to learn more about this “urban gardeng”, “vertical gardening”, and “aeroponic” stuff. I can’t wait to get back to pea, bean, and tomato breeding even though the summer and fall are waning fast. I think i’m going to repurpose my 2ft x 2ft t-slot frame that i was intending to turn into a large 3D printer and/or CNC mill. But it’s still going to be a long time before i finish that project, so i figured hey why not actually use it for something useful in the meantime! So.. that’t the plan.. 😀

 

 

Orange, Yellow, and Red-podded peas.. oh my!

Sorry for not posting anything about plant breeding lately. I’ve been rather busy this year. But i still have a few plant breeding projects (mostly from last year) that i dedicated garden space this year  for. These include my Colorado bred / adapted Watermelon Landrace, which did quite well last year (even a racoon thought so and ate one that was overripe). My Wild Pueblo squash from Utah. An attempt at a sweet potato growing / breeding project. A mass tomato growout / trial. Some perennial teosinte-maize hybrids. And my various pea variety growouts which includes: Salmon-flowered pea and crosses, mummy-white and crosses, mummy-pea, Biskopens and hoped crosses, Joseph’s red-podded peas, Joseph’s yellow podded peas, Orange-pod, Virescens Mutante, Sugar Magnolia, Sugaree, Green Beauty, Purple Passion, Dwarf Grey Sugar, Spring Rose, Canoe, Mighty Midget. I also finally made one successful cross this year between Mighty Midget and Purple Passion. That should eventually give me a super dwarf with purple seeds and also improve purple passion to have stronger stems as it’s normally a very spindly plant.

This winter, i think in February i  experimented with making a small cold-frame and using it to plant some of my peas super early. You can see it here where i watered it with snow and then a few weeks later the pea seedlings emerging but it still being rather cold outside. It worked great though. This particular cold frame is more suited for super dwarf or extra dwarf peas or lettuce or something. If i had a greenhouse i’d totally experiment more with growing vegetables in the winter.

dscf7477_zpskzmchiyy

A nice segregating yellow pod from the red-podded breeding line. Very nice.

dscf7491_zpszefr0kbv

A nice yellow and red mottled pea pod. The contrast is what makes this one really stand out! A line to keep an eye on for sure.

dscf7501_zpsybgennip

dscf7482_zpssvbrbxhf

dscf7534_zpsta16juod

A remnant from Dan Quickert’s purple snow pea project. This is one of the few that didn’t die off a few years back, so this one must have had much better genetics than it’s siblings. A nice example of a purple snow pea, which are still quite rare. This one is called ‘Midnight Snow’.

dscf7562_zpseayah0ko

And some of the orange-pod gene peas (orp) i’m growing from the Gatersleben gene bank. These have an interesting orange color on the inside of the pod. I hope to use these to make better yellows and better red podded peas in the future.

Modding the Lulzbot Mini

So recently i’ve finally gotten my homemade / homebuilt Lulzbot mini working. And it’s working pretty good. The most critical problem i was facing was that my 3d printer would start printing either too close to the heat bed (or if i added extra bed leveling washers) it would print too far away. This was a critical problem as the first few layers are the most important and if you can’t get you prints to stick to your print bed then the rest of the print will usually unstick and fail. Thanks to some helpful people on the Lulzbot forum i was able to adjust my z-offset to the correct height that worked for me.

The second issue is that recently i’ve noticed my large and tall prints failing miserably at a certain height and the filament not coming out thick enough and the top gets all cob-weby like a spider web, but worse. Apparently this is called “Heat Creep”. The problem in part may be caused by the tiny blower fan on the Lulzbot mini not providing enough cooling and heat slowly rising in the hot end until the filament actually melts too soon and cannot be extruded properly. This makes sense as the problem only occurs after a long time printing. So the logical step was to replace the tiny blower fan (or squirrel fan) with a larger fan that will do the job. The new Taz 6 has obviously taken that tiny fan into consideration and has changed it to a large 40mm fan.

EDIT: The failing on large prints may be due to me using a half-size stepper instead of a full size stepper motor for the extruder. This means too much voltage is being applied to the motor and it is getting super hot. Over time this means the motor looses steps and probably causes my printing problems.

Unfortunately the Taz 6 x-carriage and modifications are not a drop in replacement for the Lulzbot Mini i decided to make my own. This is what i came up with and it seems to work beautifully. http://www.thingiverse.com/thing:1587110

030d38b107dabf534244542162ddb535_preview_featured

 

I have only tested this on HIPS so far, but it has eliminated the heat creep i was getting with HIPS. PLA apparently suffers more from heat creep problems than other filaments, but this mod will likely help with PLA heat creep issues as well.

3296419c58b741f03adf3c87a39a0a98_preview_featured

Preview: Zamenhof meets 3D Printing?

Screenshot from 2016-05-18 07-48-01

Antaŭprezenton / Antaŭrigardon : Zamenhof renkontas 3D presanta?

Cŭ Zamenhof kunvenos KNK (Komputilo Nombra Kontrolo) maŝinojn?

Will Zamenhof meet CNC (Computer Numerical Control) machines?

Cŭ Esperanto renkontos 3D Presanta?

Will Esperanto meet 3D Printing?

Homebuilt Lulzbot Mini First Prints!

Here are a few photos from my first test prints on my new, now functional (for the most part), DIY Lulzbot Mini that i made myself from scratch (minus the frame and electronics). All hardware assembly and electrical wiring were done by me. Phew. What a ride it’s been. The upside is i now now how this printer works inside and out. The downside it was more trouble that it was worth and i wish i had just bought one instead. lol. Whatever though.

 

Progress on my Homebuilt Lulzbot Mini

Today i made significant progress on building my own Lulzbot Mini 3D printer from scratch. Technically i now have two 3d printers i’m building from scratch, but the other one is bigger and one i’m designing myself. Just like me to not finish one project before starting another. At least i’m going to work on this one and finish it before continuing on my other one (which might be converted into a homemade CNC mill).

DSCF7351

Today was a major milestone because most of the components are put together and i finally was able to test part of the electronics i wired up myself. I was able to test the Y-axis motor and limit switches as well as the X-axis stepper motor. All seemed to function correctly using Lulzbot’s Cura software. The software did have an unexpected safety feature however, it wouldn’t let me turn any of the motors on without the bed thermistor wired up. So i had to wire up a temporary 10k thermistor for testing purposes. It worked great. I was running the Cura software under Ubuntu Linux. The Cura software gave me an error that it could not autodetect the serial port or something like that, so i ran it as the root super user and that fixed the problems.

DSCF7353.JPG

Since i’m building this thing from scratch instead of buying one premade i’m trying to find ways of cutting costs. Although i think i will end up spending more than i hoped. But anyway, part of that is looking into ways that i might be able to replace expensive commercial products like the IGUS bearings and the Leadscrew nut. I’ve already drafted up a 3d printable version of the leadscrew nut and posted it here on Thingiverse. The nut has yet to be tested, but i’ve also had some RJM-01-08 IGUS bearing replica prototypes made in Nylon. The RJM-01-08 IGUS replica bearings turned out to be too tight, but with a drill i was able to make them usable. They are currently being used to remove the wiggle and slop i was experiencing from using the 1mm too small LM8UU ball bearings.

delrin_nut_2_preview_featured

I originally got the LM8UU bearings as a cheaper alternative to the commercial RJM-01-08 IGUS stock bearings the Lulzbot mini uses thinking they would work. They work, and i am currently using some, but the stock STL files from Lulzbot have holes that are 1mm too big because of the slight size difference between them and the LM8UU. I might try to modify the STL files [i have modified the lulzbot solidworks files] to make LM8UU compatible parts in the near future, but for now i’m happy with my 3d printed nylon ones. I’ve heard PLA might work too, so i will experiment with that in the future as well.

DSCF7355.JPG

Here are some more pictures:

DSCF7347.JPG

DSCF7346.JPG

DSCF7314.JPG

2015 Blogging Annual Report

The stats helper monkeys at WordPress.com mulled over how this blog did in 2015, and here’s a high level summary of its overall blog health:

2012-emailteaser
Happy New Year from WordPress.com!

The Blog-Health-o-Meter™ reads Fresher than ever.

Crunchy numbers

Featured image

A New York City subway train holds 1,200 people. This blog was viewed about 7,200 times in 2015. If it were a NYC subway train, it would take about 6 trips to carry that many people.

There were 107 pictures uploaded, taking up a total of 79 MB. That’s about 2 pictures per week.

The busiest day of the year was April 18th with 56 views. The most popular post that day was Progress on my Do-It-Yourself Magnetic Stirrer.

Where did they come from?

That’s 109 countries in all! Most visitors came from The United States. Germany & Canada were not far behind.

Featured image

The top referring sites in 2015 were:

  1. alanbishop.proboards.com
  2. planet.arcol.hu
  3. forums.adafruit.com
  4. twitter.com
  5. facebook.com

 

Attractions in 2015

Featured image

These are the posts that got the most views in 2015. You can see all of the year’s most-viewed posts in your Site Stats.

  1. Hydra CNC mill 
  2. Growing Prehistoric Corn (Teosinte) 
  3. HP/Agilent 03458-66509 7V DC Reference Clone 
  4. Progress on my Do-It-Yourself Magnetic Stirrer 
  5. 23andme DNA results 

Some of your most popular posts were written before 2015. Your writing has staying power! Consider writing about those topics again.

https://keen101.wordpress.com/2015/annual-report/